JERI Series Antenna Safety Isolator
- Information
- Video
- Resources
JERI series antenna safety isolator is designed to be installed and threaded onto an enclosure and acts as a coupling between an RF transmitter/receiver located in an approved enclosure and a passive antenna located outside the enclosure directly connected to the antenna safety isolator or through a RF cable.
It provides an intrinsically safe output and features a safety Isolator which blocks any unsafe energy in the event of a radio transmitter / receiver fault. It is available with a surge protection option.
Specifications | |
✽ Model | JERI |
✽ Product Description | Antenna Safety Isolator |
✽ Type of protection | Type of protection “db” “ia” “mb” and/or “tb” |
✽ Certification | I M2(M1) Ex db mb [ia Ma] I Mb II 2(1) G Ex db mb [ia Ga] IIC T* Gb II 2(1) D Ex mb tb [ia Da] IIIC T** Db |
✽ Standards | IEC 60079-0:2017 EN IEC 60079-0:2018 IEC 60079-1:2014-06 EN 60079-1:2014 IEC 60079-11:2011 EN 60079-11:2012 IEC 60079-18:2017 EN 60079-18:2015/A1:2017 IEC 60079-31:2013 EN 60079-31:2014 |
✽ Ambient temperature | Group I/T6/T80 °C : -40 °C up to +70 °C T5/T95 °C : -40 °C up to +85 °C |
✽ Ingress protection | IP66 |
✽ Enclosure material | Copper/ Stainless steel 304/ Stainless steel 316L |
✽ Relative humidity | 0 to 95%, non condensing |
✽ Impedance | 50Ω |
✽ Maximum Fault Voltage (Um) | 253Vr.m.s 50-60 Hz |
✽ Frequency Range | DC-6Ghz |
✽ Typical Insertion Loss | Max. 0.9 dB (DC-3GHz); Max. 1.2 dB (3-6GHz) |
✽ Dimensions (Typical version) | 93.5mm x φ34.0mm (Customizable) |
✽ Weight (Typical version) | Appr. 380g (Customizable) |